RGB LED panel light can be controlled by Multi-Function RGB controller or 4-wire and 3 loop controller (Please refer to the manual of the controllers for the details). There is a remote with the controller. You can choose the modes by remote, totally 13 modes. You also can set the address of the controller to receive DMX signal. Please note that the drive ability of controller is limited.

Attention:

1.Suggested working temperature is -20°c ~ + 40°c, or it would bring bad effects to lifespan of the lights once exceed the scope temperature.

2.RGB LED panel light can only used with Multi-Function RGB controller or RGB controller, can not use without RGB controller

3.Should choose a enough wattage transformer for controller according to the total wattage of RGB panel light.

4.Each RGB controller occupy 3 address, the address of second DMX controller with remote or RGB controller = the address of the first RGB controller +3

5.If you want all the RGB panel light change color at the same time, please set the address to be the same for each RGB panel light.

6.The color change is the same for all of the panel light which connect to the same Multi-Function RGB controller or RGB controller in a series connection way.

7.The address quantity of Multi-Function RGB controller or RGB controller can’t be more then 510.

8.Please refer to the “Product connection diagram” when many RGB panel light are connect together.

9.To make sure the control, the DMX signal wire should not be longer then 100meters, DMX signal amplifier is needed if the distance is over 100meters.

10.Indoor use only.